BEOON: Difference between revisions
From Leica Wiki (English)
Jump to navigationJump to search
mNo edit summary |
mNo edit summary |
||
| Line 2: | Line 2: | ||
*'''Code names''' - BEOON - 16511 | *'''Code names''' - BEOON - 16511 | ||
*'''Production era''' - 1959-1970 (Laney says 1970 is BEOONs last catalog reference, but produced later) | *'''Production era''' - 1959-1970 (Laney says 1970 is BEOONs last catalog reference, but produced later) | ||
*'''Type''' - Small copying stand for scales of reproduction of 1 : 1, 1 : 1.5, 1 : 2, 1 : 3. Can be used with many cameras w/ the equivalent of a 35 or 50 mm lens. The stand consists of an open base with a helicoid threaded column, platform with circular hole | *'''Type''' - Small copying stand for scales of reproduction of 1 : 1, 1 : 1.5, 1 : 2, 1 : 3. Can be used with many cameras w/ the equivalent of a 35 or 50 mm lens. The stand consists of an open base with a helicoid threaded column, platform with circular hole including thumb-screw for securing the camera lens or the included four extension tubes plus a 5 X loupe (shown at left). The loupe is used to check focus when using a rangefinder camera. The open base (w/ three included masks) allows use on a light table for slides or other transparencies. | ||
*'''Reference''' | *'''Reference''' | ||
**Page 44 of Dennis Laney's [http://www.cameramanuals.org/leica_pdf/leica_accessory_guide.pdf Leica 1984 Accessory Guide] courtesy of Mike Butkus | **Page 44 of Dennis Laney's [http://www.cameramanuals.org/leica_pdf/leica_accessory_guide.pdf Leica 1984 Accessory Guide] courtesy of Mike Butkus | ||
Revision as of 04:44, 21 January 2014
- Code names - BEOON - 16511
- Production era - 1959-1970 (Laney says 1970 is BEOONs last catalog reference, but produced later)
- Type - Small copying stand for scales of reproduction of 1 : 1, 1 : 1.5, 1 : 2, 1 : 3. Can be used with many cameras w/ the equivalent of a 35 or 50 mm lens. The stand consists of an open base with a helicoid threaded column, platform with circular hole including thumb-screw for securing the camera lens or the included four extension tubes plus a 5 X loupe (shown at left). The loupe is used to check focus when using a rangefinder camera. The open base (w/ three included masks) allows use on a light table for slides or other transparencies.
- Reference
- Page 44 of Dennis Laney's Leica 1984 Accessory Guide courtesy of Mike Butkus
- The other day I bought a Leica BEOON
- Forum discussion
