OUAGO: Difference between revisions

Revision as of 20:03, 26 October 2012

Production era - 1959-1983
Code number - 16467
Type - Visoflex II /Visoflex II helical focusing mount for 90mm f/4 Elmar or Elmar (II) f= 9 cm 1:4 lens head.
Range - Infinity to 3.25 feet - EF = 1.2 x
- Plus one OTQNO = 2 feet - EF = 1.5 x
- Plus two OTQNO = A little under 20 inches - EF = 1.7 x
Compatibility - Note: 90 Elmar lens heads above serial 1572401 are suitable for Visoflex use without modification. Lenses from 697901-1572400 require factory adjustment and below 697900 are suitable but may not reach infinity without adjustment.
Source
- Dennis Laney's Leica Accessory Guide (1st edition) pgs 49-50 courtesy of Mike Butkus
Forum discussion
- [1]

@@ Line 6: / Line 6: @@
 **Plus one [[OTQNO]] = 2 feet - EF = 1.5 x
 **Plus two [[OTQNO]] = A little under 20 inches - EF = 1.7 x
-*'''Compatibility''' - Note: 90 Elmar lens heads above serial 1572401 are suitable for Visoflex use without modification. Lenses from 697901-1572400 require factory adjustment and below 697900 are suitable but may not reach infinity without adjustment.
+*'''Compatibility''' - Note: 90 Elmar lens heads above serial 1572401 are suitable for [[Visoflex]] use without modification. Lenses from 697901-1572400 require factory adjustment and below 697900 are suitable but may not reach infinity without adjustment.
 *'''Source'''
 **[http://www.cameramanuals.org/leica_pdf/leica_accessory_guide.pdf Dennis Laney's Leica Accessory Guide (1st edition) pgs 49-50] courtesy of Mike Butkus
 *'''Forum discussion'''
 **[http://www.l-camera-forum.com/leica-forum/leica-collectors-historica/32025-check-i-dont-collect-use-visoflex.html]