Lens Hoods: Difference between revisions

Revision as of 15:57, 10 February 2010

Introduced - 1967
12504 - Fits 35mm 1:1.4. This hood unscrews into two parts to "capture" a series VII filter.
Forum discussion
- [1]

IUFOO - 12575
Introduced - 1956
Type - Lens hood for 135mm 1:4.5, 1:4 and 90mm 1:2.8, 1:4 with double trigger fastening.
Variants 1st version has a narrow chrome band with the black portion inscribed "Elmar 9cm, Hektor 13.5cm"; 2nd version had inscriptions on a bottom chrome band; 3rd version is all black, as shown

@@ Line 1: / Line 1: @@
 *[[12501]]
+----
+*'''Introduced''' - 1967
+*'''12504''' - Fits 35mm 1:1.4. This hood unscrews into two parts to "capture" a series VII filter. [[Image:12504.jpg|none|350px]]
+*'''Forum discussion'''
+**[http://www.l-camera-forum.com/leica-forum/leica-collectors-historica/16694-lens-hood-mp-hermes-edition-35-a.html]
+----
 *[[12524]]
 ----
@@ Line 10: / Line 16: @@
 **[http://www.l-camera-forum.com/leica-forum/customer-forum/114837-28-35-cron-asph-tighter-compatible.html] [http://www.l-camera-forum.com/leica-forum/customer-forum/114837-28-35-cron-asph-tighter-compatible-2.html]
 ----
 *'''Introduced''' - 1963
 *'''12585''' - Fits 50mm 1:2, 1:2.8, 1:3.5 and 35mm 1:2.8, 1:3.5 [[Image:12585.jpg|none|300px]]
@@ Line 17: / Line 22: @@
 **[http://www.l-camera-forum.com/leica-forum/leica-collectors-historica/16694-lens-hood-mp-hermes-edition-35-a.html]
 *'''12586''' - Similar type, fits 50 mm 1:1.4
-----
-*'''Introduced''' - 1967
-*'''12504''' - Fits 35mm 1:1.4. This hood unscrews into two parts to "capture" a series VII filter. [[Image:12504.jpg|none|350px]]
-*'''Forum discussion'''
-**[http://www.l-camera-forum.com/leica-forum/leica-collectors-historica/16694-lens-hood-mp-hermes-edition-35-a.html]
-----